There are situations when it is required to install an automatic door bottom seal to the pull side of a door, rather than to the push side of the door.

To do that, the automatic door bottom seal is installed to the face of the pull side of the door with the actuator pin projecting towards the lock side of the door (not the hinged side).  Then this Actuator Block is installed to the face of the door frame inline with the seal and when the door is closed the seal actuator pin compresses against the Actuator Block, to drop the seal down to the floor surface.

This works in conjunction with products DBS1230, DRS1530 and other DSA automatic door bottom seals.

The post ACTUATOR BLOCK appeared first on DSA | Door Seals of Australia.

DRS1540GL is an automatic door bottom seal used to seal the door to floor gap of a hinged glass door.

Gap Size

It is suitable to seal gaps to 14 mm.

The post DRS1540GL appeared first on DSA | Door Seals of Australia.

GLASS BOTTOM SLIDE is designed for the bottom of glass doors, with a special activation mechanism that works with the standard door U-guide on the floor, closing the seal on the floor when the door is totally closed.

The 4 fin seal is self extinguishing co-extruded thermoplastic and acoustic rated to 38dB.

It is suitable for fitting to the bottom of 10 or 12mm thick sliding glass doors and available in a choice of sizes and finishes.

Gap Size

14mm maximum.

The post GLASS BOTTOM SLIDE appeared first on DSA | Door Seals of Australia.

The major advantage of GLASS BRUSH is that the brush seal is always in contact to the floor, due to a self-regulating spring maintaining the gap coverage.

Basic and elegant, this model can easily be fixed by a VHB double sided adhesive tape.

Available in different profile finishes, this product can be shortened on both sides to suit door width.

Gap Size

15mm maximum.

The post GLASS BRUSH appeared first on DSA | Door Seals of Australia.

Model designed for the bottom of glass doors, with an activation mechanism that works when engaged by the door frame or surrounding panel, closing the seal on the floor when the door is totally closed. The cell seal is manufactured from self extinguishing co-extruded thermoplastic and is tested to a 38dB acoustic rating.

Gap Size

14mm maximum.

The post GLASS BOTTOM appeared first on DSA | Door Seals of Australia.

GLASS BUMPER consists of a soft transparent bumper cell seal, which is quickly installed with a high strength 3M transparent self-adhesive.

Accessories available are the (A) GLASS WIPE which is used to pre-clean the glass surface where the seal will be placed  (B) GLASS BUMPER TOOL, which ensures a straight and firm installation.

Gap Size

It is suitable to seal gaps to 4.0 mm

The post GLASS BUMPER appeared first on DSA | Door Seals of Australia.

GLASS LIP SLIDE consists of a ‘L’ shaped transparent seal with an projecting flexible lip. It is quickly installed with a supplied high strength 3M transparent self-adhesive. Then the seal lip can be shortened by simply tearing off the required part of the lip, to suit gaps from 12 to 30mm.

Also available is the GLASS WIPE which is used to pre-clean the glass surface where the seal will be placed.

Gap Size

Suitable to seal gaps from 12 to 30 mm.

The post GLASS LIP SLIDE appeared first on DSA | Door Seals of Australia.

GLASS LIP consists of a soft transparent seal with a three lips, which is quickly installed with a high strength 3M transparent self-adhesive. The length of lips can be shortened by simply tearing off part of the lips, to meet gaps from 2.5 to 7.0mm.

Accessories available are the (A) GLASS WIPE which is used to pre-clean the glass surface where the seal will be placed  (B) GLASS LIP TOOL, which ensures a straight and firm installation.

Gap Size

It is suitable to seal gaps from 2.5 to 7.0 mm

The post GLASS LIP appeared first on DSA | Door Seals of Australia.