There are situations when it is required to install an automatic door bottom seal to the pull side of a door, rather than to the push side of the door.

To do that, the automatic door bottom seal is installed to the face of the pull side of the door with the actuator pin projecting towards the lock side of the door (not the hinged side).  Then this Actuator Block is installed to the face of the door frame inline with the seal and when the door is closed the seal actuator pin compresses against the Actuator Block, to drop the seal down to the floor surface.

This works in conjunction with products DBS1230, DRS1530 and other DSA automatic door bottom seals.

The post ACTUATOR BLOCK appeared first on DSA | Door Seals of Australia.

A new, revolutionary automatic door bottom seal that combines excellent acoustic and mechanical 52 dB performance in a single item.

It has an innovative ability to adapt to an uneven floor with joint dips or bumps, due to the self-adapting 7 fin seal insert which has cross-cuts along the full length.

The DSA fitting system ensures a perfect installation as the seal is positioned and adjusted for optimum performance. Overall length can be cut down by up to 150mm.

Gap Size

20mm maximum.

The post MAXI FILLER appeared first on DSA | Door Seals of Australia.

We can provide self adhesive tape with Polyester (thin) or Foam (thicker) backing. 9 or 18mm widths. Roll lengths are 50M.

The post Self Adhesive Tape appeared first on DSA | Door Seals of Australia.

The DS3 has a spring loaded control mechanism that will automatically engage the seal when the door is opened or closed. The twin strip seals provide protection against smoke, draughts, light, airborne dust, vermin, bushfire embers and energy loss.

The post DS3 appeared first on DSA | Door Seals of Australia.

DSV4-CT Cutting tool with measuring device.

DSV4-SW Sealing welder.

IF you would like to know about the advantages that these tools provide, please contact us.

The post Installation Tools appeared first on DSA | Door Seals of Australia.

DIGIPLEXI is the evolution of the protection system that prevents fingers from being pinched on a door’s hinge.

It can be applied on the hinge side of all types of doors and gates and is the ideal product to ensure safety at home or in public places such as hotels, hospitals, public offices, kindergartens and schools where aesthetics need to match safety.

Understated and elegant it is made of a transparent polycarbonate body (UV resistant), framed with aluminium profiles which are part of the mechanical movement which allows the door to open up to 120° covering totally the shear point between the door and the frame.

DIGIMINI is an associated product also available which seals the gap on the hinge side of the door, aligning with the hinge pin.

The post DIGIPLEXI appeared first on DSA | Door Seals of Australia.

DRS1540GL is an automatic door bottom seal used to seal the door to floor gap of a hinged glass door.

Gap Size

It is suitable to seal gaps to 14 mm.

The post DRS1540GL appeared first on DSA | Door Seals of Australia.

GLASS BOTTOM SLIDE is designed for the bottom of glass doors, with a special activation mechanism that works with the standard door U-guide on the floor, closing the seal on the floor when the door is totally closed.

The 4 fin seal is self extinguishing co-extruded thermoplastic and acoustic rated to 38dB.

It is suitable for fitting to the bottom of 10 or 12mm thick sliding glass doors and available in a choice of sizes and finishes.

Gap Size

14mm maximum.

The post GLASS BOTTOM SLIDE appeared first on DSA | Door Seals of Australia.

The major advantage of GLASS BRUSH is that the brush seal is always in contact to the floor, due to a self-regulating spring maintaining the gap coverage.

Basic and elegant, this model can easily be fixed by a VHB double sided adhesive tape.

Available in different profile finishes, this product can be shortened on both sides to suit door width.

Gap Size

15mm maximum.

The post GLASS BRUSH appeared first on DSA | Door Seals of Australia.

Door Seal System 52 STC/Rw : DS20-24SB/DS44/DRS1530

• Door Perimeter Seal:  DS20-24SB, DS44 and S9168 around the full perimeter
• Door Bottom Seal:  DRS1530.  FR (Fully Recessed) model.
• For non-rebated double door sets:  we recommend also the DS16 seal for the astragal (vertical meeting stiles).
• For rebated double door sets:  we recommend also the DS16 seal and SV512 option for the astragal (vertical meeting stiles).

The post Door System 52 STC/Rw : DS20-24SB/DS44/S9168/DRS1530 appeared first on DSA | Door Seals of Australia.